ASSEMBLY LEDGERS

Denver roofing services engineered to Front Range hail loads.

Technical datasheets, price per square calculations, and fastener schedules across asphalt shingles, standing seam metal, stone-coated steel, and synthetic composite slate.

Supervising Roofer Ivan Petrov (Since 2018)

Warranty Baseline 10-Year Workmanship

Unit Measurement 1 Square = 100 Sq Ft

Estimate Delivery On-Site Physical Inspection

Asphalt Shingle Roof Replacement

Engineered for complete residential tear-offs across the Denver metro area. Replaces degraded 3-tab or storm-damaged shingles with high-durability architectural assemblies backed by our ten-year workmanship guarantee.

Component Parameter	Engineering Specification	Standard Value
Price Basis	Complete tear-off and replacement on standard Denver residential roof geometry.	$15,000–$20,000 per roof
Deck Preparation	100% tear-off to bare OSB or plywood. Defective or rotted decking sheets replaced before underlayment.	Bare Deck Inspection
Valley Waterproofing	Self-adhering modified bitumen ice-and-water shield membrane rolled full width along all roof valleys and rakes.	Dual Layer Barrier
Underlayment	High-tensile woven synthetic underlayment mechanically fastened with plastic cap coil nails.	Class A Fire Rated
Fastener Schedule	6 electro-galvanized ring-shank coil nails placed along the designated nailing zone of each shingle.	110 mph Wind Rating
Ventilation Intake	Perimeter aluminum drip edge with continuous baffle ridge vent along peak ridges to balance attic temperatures.	Balanced Net Free Area

What the replacement quote depends on: Measured square footage, roof slope pitch (e.g., 4:12 vs 10:12), number of existing shingle layers, underlying decking damage, and valley count.

Schedule On-Site Inspection

Roofer securing dimensional asphalt shingles with pneumatic coil nailer along chalk guide line

Asphalt Shingle Roofing Work

Itemized square-by-square pricing for new construction, planned additions, and re-roof projects where structural scope is contracted on physical surface area.

Unit Ledger Item	Scope of Installation Work	Unit Price Basis
Price Per Square	Complete material and labour rate per roofing square (one square equals 100 square feet of deck surface).	$585–$825 per square
Material Quality	Heavyweight dimensional laminated fiberglass-asphalt shingles with ceramic-coated mineral granules.	Architectural Grade
Wind Tolerance	Fastened using enhanced Front Range 6-nail perimeter pattern to prevent uplift during high downslope mountain gales.	Up to 110 mph
Waste & Rake Allowance	Calculated per hip and valley geometry (typically 10% on simple gables, 15% on multi-valley hips).	Measured On Site
Deck Inspection	Substrate verification prior to fastening; excludes rotted board concealment.	100% Supervised

Pricing variance factors: Slope pitch, second-story access requirements, valley length, starter course requirements, and ridge cap length.

Schedule On-Site Inspection

Close-up macro detail of metal roof flashing joint and synthetic underlayment fastening

Premium Roofing: Metal, Stone-Coated Steel, Synthetic

Engineered assemblies for property owners demanding non-combustible Class A fire safety, Class 4 hail resistance, and extended lifecycle durability under extreme Colorado weather.

System Component	Engineering Specification	Unit Price Basis
Price Per Square	Complete supply, panel fabrication, concealed clip fastening, and perimeter flashings per 100 square feet.	$1,275–$2,300 per square
Standing Seam Metal	24-gauge structural Galvalume steel with 1.5-inch mechanical lock or snap-lock concealed fasteners. No exposed rubber washers.	24-Gauge Kynar 500
Stone-Coated Steel	Corrosion-resistant steel panels coated with ceramic stone granules. Interlocking batten or direct-to-deck configuration.	Class 4 Impact Certified
Synthetic Composite Slate	Engineered polymer composite replicating authentic quarry slate texture without the structural weight penalty.	50-Year Material Life
Impact Performance	UL 2218 Class 4 certified to withstand direct two-inch steel ball impact tests without surface fracture.	Class 4 (Highest)
Thermal Underlayment	High-temperature self-adhering ice-and-water underlayment rated to 250°F under metal panels.	High-Temp Rated

Cost variance parameters: Panel gauge selection, concealed clip count, valley complexity, snow retention brackets, and chimney saddle fabrication.

Schedule On-Site Inspection

Textured synthetic composite slate roofing tile showing interlocking edge and fastener clips

Roof Repair & Hail Mitigation

Targeted structural leak resolution and hail impact remediation. We verify damaged underlying mats using pitch gauges and core tests before prescribing repair vs full tear-off.

Repair Task	Diagnostic & Repair Method	Repair Basis
Job Cost Range	Dedicated repair deployment covering diagnostics, damaged component extraction, new flashing, and seal.	$450–$2,900 per job
Hail Impact Evaluation	Physical chalk square count and mat fracture check. We document exposed fiberglass and cracked underlayment.	Documented Evidence
Pipe Boot Replacement	Removal of split neoprene collars and installation of heavy-gauge aluminum or lead flashing bases with silicone counter seals.	Mechanical Collar Seal
Valley Re-Lining	Extraction of punctured valley shingles, laying new self-adhering membrane, and reinstalling interlocking metal channel.	Water-Tested Joint
Wind Tear-Off Repair	Selective shingle replacement on blow-off slopes, re-nailing to 6 nails per shingle with hand-sealed tar tabs.	Matched Dimensional

Repair pricing depends on: Steepness of pitch, access height, extent of deck moisture penetration, flashing customisation, and emergency tarping requirements.

Schedule On-Site Inspection

Severe hail impact damage fracturing asphalt shingle surface with exposed fiberglass mat

Comparative Assembly Matrix

Direct physical comparison of all four roofing service categories offered by Miles High Roofing Solutions in Denver, Colorado.

Assembly / Scope	Pricing Basis	Wind Resistance	Hail Rating	Material Lifespan	Warranty Coverage
Asphalt Shingle Replacement	$15,000–$20,000 / roof	110 mph (6 nails)	Class 3 / Class 4 Opt	25–30 Years	10-Year Workmanship
Asphalt Shingle Work	$585–$825 / square	110 mph (6 nails)	Class 3 Standard	25–30 Years	10-Year Workmanship
Premium Metal & Synthetic	$1,275–$2,300 / square	130–140 mph	Class 4 (Highest)	50+ Years	10-Year Workmanship
Roof Repair & Mitigation	$450–$2,900 / job	Matched to Roof	Targeted Restoration	Slope Dependent	Workmanship on Repair

Need an on-site roof check?

Ivan Petrov inspects your Denver property, checks roof deck deflection, and provides an exact written estimate on site.

Schedule On-Site Inspection Call 303-659-6334